Add pwrstatd config and scripts

pwrstatd/pwrstatd-lowbatt.sh

@@ -0,0 +1,14 @@
+#!/bin/bash
+echo "Warning: The UPS's battery power is not enough, system will be shutdown soon!" | wall
+
+# Enable to send email
+enable_email="yes"
+
+# Send email using "/etc/sg-send-mail.sh" script
+email_from=""
+email_to=""
+email_sender=""
+
+if [[ $enable_email == "yes" ]]; then
+        /etc/sg-send-email.sh -f ${email_from} -n ${email_sender} -t ${email_to} -s "UPS's battery running low'" -m "$(date)"
+fi

pwrstatd/pwrstatd-powerfail.sh

@@ -0,0 +1,14 @@
+#!/bin/bash
+echo "Warning: Utility power failure has occurred for a while, system is now powered by UPS" | wall
+
+# Enable to send email
+enable_email="yes"
+
+# Send email using "/etc/sg-send-mail.sh" script
+email_from=""
+email_to=""
+email_sender=""
+
+if [[ $enable_email == "yes" ]]; then
+        /etc/sg-send-email.sh -f ${email_from} -n ${email_sender} -t ${email_to} -s "Power failure on hustler'" -m "$(date)"
+fi

pwrstatd/pwrstatd.conf.example

@@ -0,0 +1,133 @@
+#
+# pwrstatd configuration file
+#
+
+# You must restart pwrstatd after changing this file in order for changes to take effect.
+# Ex:/etc/init.d/pwrstatd restart
+
+#
+# Action setting for event of Power Failure
+#
+
+# A delay time in seconds since event of Power Failure occur then to run shell
+# script and shutdown system. Allowed range is 0 ~ 3600. Default is 60 sec.
+powerfail-delay = 60
+
+# Enable to run shell script when the event of Power Failure occur.
+# The allowed options are yes and no. Default is yes.
+powerfail-active = yes
+
+# Assign a path of script file for event of Power Failure.
+# The default is /etc/pwrstatd-powerfail.sh
+powerfail-cmd-path = /etc/pwrstatd-powerfail.sh
+
+# How much time in seconds to take script running for event of Power Failure.
+# The allowed range is 0 ~ 3600. Default is 0 sec.
+powerfail-duration = 0
+
+# Allow Daemon to shutdown system for event of Power Failure.
+# The allowed options are yes and no. Default is yes.
+powerfail-shutdown = no
+
+#
+# Action setting for event of Battery Low
+#
+
+# A threshold of Battery Capacity, If the battery capacity is lower than this
+# value and a event of Battery Low will be identified. The unit is percentage.
+# The allowed range is 0 ~ 90. Default is 35 %.
+lowbatt-threshold = 35
+
+# A threshold of Remaining Runtime, If the Remaining Runtime is lower than this
+# value and a event of Battery Low will be identified. The unit is second.
+# The allowed range is 0 ~ 3600. Default is 300 sec.
+# Note: When meet this condition the below 'shutdown-sustain' property
+# will be ignored.
+runtime-threshold = 300
+
+# Enable to run shell script when the event of Battery Low occur.
+# The allowed options are yes and no. Default is yes.
+lowbatt-active = yes
+
+# Assign a path of script file for event of Battery Low.
+# The default is /etc/pwrstatd-lowbatt.sh
+lowbatt-cmd-path = /etc/pwrstatd-lowbatt.sh
+
+# How much time in seconds to take script running for event of Battery Low.
+# The allowed range is 0 ~ 60. Default is 0 sec.
+lowbatt-duration = 0
+
+# Allow Daemon to shutdown system for event of Battery Low.
+# The allowed options are yes and no. Default is yes.
+lowbatt-shutdown = yes
+
+# Turn UPS alarm on or off.
+# The allowed options are yes and no. Default is yes.
+enable-alarm = yes
+
+# The necessary time in seconds for system shutdown.
+# The UPS will turn power off when this time is expired.
+# The allowed range is 0 ~ 3600. Default is 600 sec.(10 min.)
+# If the computer shutdown is cause by low runtime condition, the UPS will
+# turn power off when the time is expired that time is assigned on
+# 'runtime-threshold' property and it is no longer to refer the
+# 'shutdown-sustain' property.
+
+shutdown-sustain = 600
+
+# Daemon will turn UPS power off once it ask system shutdown cause by a power
+# event. Allowed options are yes and no. Default is yes.
+turn-ups-off = yes
+
+# The period of polling UPS in seconds.
+# The allowed range is 1 ~ 60. Default is 3 sec.
+ups-polling-rate = 3
+
+# the period of re-try to find available UPS in seconds since find nothing at
+# last time. The allowed range is 1 ~ 300. Default is 10 sec.
+ups-retry-rate = 10
+
+# Prohibiting daemon to provide communication mechanism for client, such as
+# pwrstat command. normally, it should be 'no'. It can be 'yes' if any security
+# consideration. Allowed options are yes and no. Default is no.
+prohibit-client-access = no
+
+# The pwrstatd accepts four types of device node which includes the 'ttyS',
+# 'ttyUSB', 'hiddev', and 'libusb' for communication with UPS. The pwrstatd
+# defaults to enumerate all acceptable device nodes and pick up to use an
+# available device node automatically. But this may cause a disturbance to the
+# device node which is occupied by other software. Therefore, you can restrict
+# this enumerate behave by using allowed-device-nodes option. You can assign
+# the single device node path or multiple device node paths divided by a
+# semicolon at this option. All groups of 'ttyS', 'ttyUSB', 'hiddev', or
+# 'libusb' device node are enumerated without a suffix number assignment.
+# Note, the 'libusb' does not support suffix number only.
+#
+# For example: restrict to use ttyS1, ttyS2 and hiddev1 device nodes at /dev
+# path only.
+# allowed-device-nodes = /dev/ttyS1;/dev/ttyS2;/dev/hiddev1
+#
+# For example: restrict to use ttyS and ttyUSB two groups of device node at
+# /dev,/dev/usb, and /dev/usb/hid paths(includes ttyS0 to ttySN and ttyUSB0 to
+# ttyUSBN, N is number).
+# allowed-device-nodes = ttyS;ttyUSB
+#
+# For example: restrict to use hiddev group of device node at /dev,/dev/usb,
+# and /dev/usb/hid paths(includes hiddev0 to hiddevN, N is number).
+# allowed-device-nodes = hiddev
+#
+# For example: restrict to use libusb device.
+# allowed-device-nodes = libusb
+allowed-device-nodes = 
+
+# Daemon will hibernate system to instead of system shutdown when power
+# event occur. Allowed options are yes and no. Default is no.
+hibernate = no
+
+# Enable cloud solution.
+# The allowed options are yes and no. Default is no.
+cloud-active = no
+
+# Account for cloud server login.
+cloud-account = 
+